dlaery's latest activity
-
Start again. If you scale the gears you will most likely end up with non standard tooth sizes. Gear selection normally runs: Tooth size... -
dlaery replied to the thread draw gear to a set diament.ok, now the design calls for larger diamenter gears. it looks like I just start over. or can I scale the gears and will that work ok?
-
dlaery replied to the thread What determines the Item number in the BOM?.Thanks! I figured out how to delete them and re-create.
-
dlaery replied to the thread What determines the Item number in the BOM?.my exploded view drawing is wrong with the BOM. the "call out" is what it wrong. before today I resequenced my BOM and saved. I...
-
dlaery replied to the thread can't get an assembly contraint to work.I was able to get ti work but had to suppress an extrusion and then the constraint worked and then unsuppressed the extrusion and it...
-
-
this is 2 flat surfaces I am tring to mate and get this error? i deleted the part and re-inserted into the assembly and will not...
-
-
dlaery replied to the thread draw gear to a set diament.well i finally got ot this far. Thanks for the help!
-
-
dlaery replied to the thread draw gear to a set diament.I used David Bolsover's utilities and now a day later I don't remember what number I used. if you don't know what the pitch is but know...
-
dlaery replied to the thread draw gear to a set diament.how do I constrain these gears? or where do i start? should I have saved a print screen when I did the Utilities? I have to draw a...
-
-
dlaery replied to the thread draw gear to a set diament.thanks i have installed it and still trying to figure out how to use this.
-
dlaery replied to the thread draw gear to a set diament.Thanks!
-
I use the gear geanerator but I don't know how to draw to a gear to a certain diameter. this will be 3 gears in a row I need them to...
-
-
dlaery replied to the thread how to draw gears.where would i install these scripts? Here? \\MAIN\Users\Hook\Documents\Alibre Script Library\Examples\Mechanical
-
dlaery replied to the thread how to draw gears.i delted the Profile and now it work.
-
dlaery replied to the thread how to draw gears.ok I am trying the video Alibre - Make Helical and Herringbone Gears the Easy Way |JOKO ENGINEERING| and cannot get it to work. i don't...
-
